High frequency working

The motor is frequency motor, and control panel is frequency inverter system. It can 

change work power output gently. So the door can start and stop in a soft process. Its 

running speed will accelerate or decelerate gradually. This can avoid overriding and 

over-heating caused by constant up and down. So the door can keep running and no 

need worry its motor burnt or structure damaged. 

Our door can run up to 2000 times per day. This is why it is a best choice for busy area with heavy traffic like forklifts or passing workers. Our door can run up to 2000 times per day. 

This is why it is a best choice for busy area with heavy traffic like forklifts or passing 

workers. 

   Longer work life with lower maintenance

    Advanced Italy servo technology drive motor and control system. Compared with 

    traditional door system in the market, it has several advantages:

• Double encoders:  

    They calibrate with each other, to make running limit more accurate than tradtional limit 

    sensors. This completely avoid running limits error and reduce maintenance. And even if     one encoder is damaged, you can switch to another encoder and the door will continue 

    to work well, no need repair;

• Absolute encoder:  

     It will always keep the set limits even during power failure. So you no need bother to do 

     the frequent job of re-seting the limits;

• Flexile Torque Control System:  

    The output torque of motor keeps changing according to running speed and load 

    automaticlaly. This avoid over-heating and over-load after long time use, and make sure 

    the door work longer life.

User freindly Human-machine interface system

There is a LED display on the controller, showing all parameters and setting steps in 

English language. You can set or change any parameters like using a mobile phone. So you will feel very easy and comfortable to use the doors even you do not have any experience. 

And it is inbuilt with Fault-shooting program. The display will show the error information 

when there is some problem. 

There are addtional input and output signals in the controller. You can activate it by the 

screeen and the door will work together with your production line, robots, conveyor, or 

other machines.

   Various Colors 

    We supply six different colors for your choice. You can make a free selection among 

    them. Our doors can integrate into your whole building design and make the building 

    harmony and beautiful.

    Blue, Yellow, Orange, Grey, White, Full clear

    A transparent window can be made at human ey height. This makes it easy to see what 

    is happening at another side of the door. It will be more safe for a busy area with moving 

    workers and forklifts or other vehicles. 

Multiple safety protection

Considering the high speed running of the door, safety protection become very important to avoid possible accidents.  This can not be neglected when using such high performance 

doors. There are three safety protection devices:

• Safety photo sensor:  

    The sensor can send a infrared light beam from one side to another. When it is blocked 

    by passing human or vehicles, the door will immediately stop or get up. Thus it aims to 

    avoid accident;

• Safety airbag sensor: 

    It is a soft rubber airbag at the bottom. If something touches the bottom, the door will           stopor get up. So it aims to stop accident once it happens;

• Alarm lamp: 

    It gives out light flash signal or sound signal when the door running. Passing workers or 

    vehicles can easily get aware that the door is working and take special care to avoid 

    accidents.

   Interlocking Function

    In some industries like food, pharmaceutical or electronics, it is a very important issue to 

    keep hygiene and clean inside the room.  This is critical to keep final quality level of the 

    finished products, no matter it is food, medicine or electronic applicances.  How to 

    prevent outside air and dust is a major difficulty. A interlocking passage system can solve     this problem perfect.  

    Door A and Door B are installed at two ends of the passage. When door A opens, Door B     will never open. Only after Door A closed, Door B can open.Thus, at any time, there is at     least one door keep closed. So the outside air and dust will never be able to enter the 

    room.

    We have input the interlocking function in every door.  When necessary, any two doors 

    can be interlocked.